Uniformly wide lamellae of foamed up Vulkollan® are attached at alternating angles with plastic foam lamellae attached in the spaces between them to the aluminium hub of the FAPI-KS/V SPECIAL.
The height of the coating or the length of the lamellae of foamed up Vulkollan® and plastic foam can be varied depending on the application (standard: 25 mm). The longer the lamellae are, the less rigid the material becomes, which in turn reduces the aggressiveness of the contact wheel.
Advantages
Because of their lamellae of foamed up Vulkollan® and plastic foam, contact wheels of the FAPI-KS/V – series are extremely aggressive contact wheels.
Benefits of contact wheels with this design:
- Maximum removal rate
- Plastic lamellae provide optimum cooling of the abrasive belt
- Wear-resistance
- Oil-resistance
- Grease-resistance
Because of these outstanding properties, contact wheels of the FAPI-KS/V – series have proven themselves in the market over decades. The FAPI-KS/V – series continues to play an outstanding role even with our newest developments.
Applications
The contact wheel FAPI-KS/V SPECIAL is used in particular when high abrasion is required in a short time (for example for surface grinding). But even lightly rounded workpieces can be ground without difficulty using this contact wheel.
Grinding: surface grinding, cylindrical grinding, profile sanding
Grinding method: dry grinding
Operation: automatic grinding, portable machines, pedestal grinder/backstand, robotic grinding
Dimensions
Diameter: 150 to 450 mm
Width: 20 to 200 mm
Lamellae high: 25 mm
Hole: as per specification
Other dimensions on request!
Coating hardness
The hardness of the lamellae of foamed up Vulkollan® can be differentiated into three levels. The spectrum extends here from a medium soft lamellae of foamed up Vulkollan® with 60º Shore (A) to an extra hard lamellae of foamed up Vulkollan® with 90º Shore (A).
The correct lamella hardness always depends on the individual application.
Vulkollan® = registered trademark of Covestro Group
Applications
The contact wheel FAPI-KS/V SPECIAL is used in particular when high abrasion is required in a short time (for example for surface grinding). But even lightly rounded workpieces can be ground without difficulty using this contact wheel.
Grinding: surface grinding, cylindrical grinding, profile sanding
Grinding method: dry grinding
Operation: automatic grinding, portable machines, pedestal grinder/backstand, robotic grinding
Coating Hardness
The hardness of the lamellae of foamed up Vulkollan® can be differentiated into three levels. The spectrum extends here from a medium soft lamellae of foamed up Vulkollan® with 60º Shore (A) to an extra hard lamellae of foamed up Vulkollan® with 90º Shore (A).
The correct lamella hardness always depends on the individual application.
Dimensions
Diameter: 150 to 450 mm
Width: 20 to 200 mm
Lamellae high: 25 mm
Hole: as per specification
Other dimensions on request!
Vulkollan® = registered trademark of Covestro Group